Synthetic Erosion Control Mat

What Is the Synthetic Erosion Control Mat?

The Synthetic Erosion Control Mat is a three-dimensional erosion control and turf reinforcement product. Heavily UV-stabilised synthetic polypropylene fibres are needle-punched together into an open weave 3D structure, creating a matrix that holds soil, seed and water in place while allowing free plant growth through the mat.

It is designed to protect underlying soil in steep slopes and channels from moderate to high velocity water flow, rain, wind and other erosive conditions, and provides immediate protection that continues to work for extended periods before grass or other vegetation is established.

As roots establish, they interlock with the mat to form a permanent vegetated reinforcement layer, making it ideal for channels, swale drains, wetlands, floodways, spillways and embankments where immediate or long-term erosion control is required.

Đặc điểm và lợi ích của sản phẩm

1. Open 3D Structure – the needle-punched 3D matrix traps seed, soil and water to create a stable growing environment.

2. Permanent Protection – protects soil immediately and stays in place as a permanent root-reinforced armour layer.

3. Proven UV Resistance – UV-stabilised fibres show no loss of tensile strength after 1,000 hours of accelerated UV testing.

4. Faster Vegetation Establishment – trial data shows up to 555% greater biomass than untreated control at 21 days.

5. Fast, Low-Labour Installation – lightweight rolls install quickly by hand on batters and in channels, with low labour cost.

6. Long-Term Cost Benefits – avoids repeated re-seeding and sediment clean-up in highly erosive environments.

Bảng thông số sản phẩm

Note: hydraulic values are based on independent flume testing under 7-hour continuous flow, tested unvegetated and with 6 months of vegetation growth.

Các kịch bản ứng dụng

1. Channel and Swale Lining – irrigation and drainage channels, ditches and grassed swales where concentrated flow causes soil loss.

2. Wetlands and Drainage Systems – stormwater wetlands, retention basins and drainage systems requiring stable vegetated surfaces.

3. Floodways and Spillways – floodways, spillways, dam walls and embankments exposed to periodic high-velocity flow.

4. Steep Slopes and Embankments – cut and fill slopes, batters and retaining wall faces where vegetation must be established quickly.

5. Road and Rail Works – road edge rehabilitation, verges and median drains along highways and railways.

6. Mining and Ecological Restoration – landfill capping, mine site rehabilitation and civic landscaping where natural habitat is restored.

Kiểm soát chất lượng

Production is carried out under an ISO 9001:2015 certified quality management system, with incoming polymer checked and the needle-punching line monitored for mass per unit area, thickness and fibre bonding. Every production batch is sampled and tested, and results are traceable back to the production batch so project specifications can be verified at any time.

Test reports, batch certificates and third-party inspection (SGS / BV) are available for project submittals and pre-shipment verification.

Đóng gói và giao hàng

Mats are supplied as palletised rolls, strapped and wrapped for export handling. Roll dimensions and pallet quantities can be customised to suit 20GP or 40HQ container loading plans, and loading plans with quantities and weights are issued with every quotation. Standard orders ship within 7-14 days of deposit; FOB Qingdao is standard, with CFR and CIF terms available on request, and third-party pre-shipment inspection can be arranged before loading.

Câu hỏi thường gặp

Q1: What is the Synthetic Erosion Control Mat used for?

A: It is a permanent erosion control and turf reinforcement mat for slopes, channels, swale drains, wetlands, floodways, spillways and embankments, protecting soil from water flow, rain and wind.

Q2: Does it work before vegetation is established?

A: Yes. It provides immediate protection from the day of installation and can be exposed to weather for extended periods while seeds germinate and grow through the mat.

Q3: How much does it improve vegetation growth?

A: Trials showed up to a 555% increase in biomass at 21 days compared with untreated control pots, because the 3D structure traps seed, soil, moisture and fertiliser in place.

Q4: Will sunlight degrade the mat?

A: No. The fibres are heavily UV-stabilised and show no loss of tensile strength after 1,000 hours of accelerated UV exposure testing.

Q5: Can it handle high flow velocities in channels?

A: Yes. Independent flume testing recorded limiting velocities of 2.9 m/s unvegetated, rising to 7.5 m/s once vegetation is established, with limiting shear stresses of 180-510 N/m2.

Q6: Does the mat need to be removed after vegetation grows?

A: No. It is a permanent solution – the mat stays in place and roots interlock with it to form a durable vegetated reinforcement layer.

Q7: What information is needed for a quotation?

A: Just send the project type (slope or channel), area, slope angle, roll size preference, quantity and destination port. Loading plans and OEM/ODM options are provided with the offer.