Spiral Rigid Permeable Pipe

What Is Spiral Rigid Permeable Pipe?

Spiral Rigid Permeable Pipe is a hard-wall drainage pipe formed by spirally winding modified polymer profiles into a rigid tube with open, zigzag cells across the wall. The open structure allows groundwater to enter continuously along the whole pipe surface instead of through a few perforations, while the rigid spiral wall keeps the pipe self-supporting under backfill and traffic loads – no crush, no collapse, no loss of flow path.

Compared with perforated steel-reinforced concrete or corrugated pipes, the same diameter of spiral rigid permeable pipe collects and conveys water several times faster, and at a fraction of the weight – lowering transport, handling and installation costs on every project.

1.Full-Wall Intake

The open zigzag cells cover the entire pipe wall, so water enters everywhere along the pipe – no reliance on drilled holes that silt up or lines of perforations that miss the water table.

2.Rigid and Self-Supporting

The spiral profile gives the pipe true ring stiffness. It keeps a stable flow section under soil cover, concrete encasement and traffic loads without external corrugated supports.

3.Fast Conveyance

The smooth internal spiral channel conveys collected water 2-3 times faster than same-diameter steel-reinforced concrete or corrugated pipes, shortening drainage paths and reducing pipe runs.

4.Chemical and Weather Resistant

Made of modified corrosion-resistant polymer, the pipe withstands acids, alkalis and salts in soil and groundwater, and resists ageing for long buried service life with no maintenance.

Tabel Parameter Produk

Skenario Aplikasi

1.Tunnels and Underground Structures

Installed around tunnel linings, metro stations and basements as the primary drain, the open-wall pipe intercepts groundwater continuously and keeps seepage away from waterproofing systems, protecting structures for their full service life.

2.Road and Railway Subgrade Drainage

Laid in longitudinal and transverse underdrains beneath road and rail formations, the rigid pipe keeps the subgrade dry under traffic loads, preventing pumping, frost heave and pavement failure.

3.Slopes, Retaining Walls and Basements

Placed behind retaining walls, on cut slopes and around building foundations, the pipe lowers the water table and relieves hydrostatic pressure – the leading cause of wall overturning and slope sliding.

4.Sports Fields, Landscapes and Farmland

Used under golf courses, sports fields, parks and agricultural land, the full-wall intake drains surface water quickly and evenly, keeping playing surfaces firm and farmland free of waterlogging.

Kontrol Kualitas

Every batch is checked from incoming polymer to finished pipe: melt index on arrival, continuous in-line monitoring of wall thickness and pitch, then dimensional and ring-stiffness tests on sampled sections. Pipes carry a traceable batch number, and SGS / BV reports are available for project submittals.

Pengemasan dan Pengiriman

Pipes ship in standard lengths, bundled with end protection and matching shipping marks, then palletised or loaded loose; small diameters are coiled to save container space. Loading plans with quantities and weights are issued per quotation. FOB Qingdao, 7-14 days after deposit, third-party inspection on request.

Pertanyaan yang Sering Diajukan (FAQ)

Q1: How is rigid permeable pipe different from soft perforated pipe?

The spiral-wound wall is self-supporting. It resists crushing under backfill and traffic loads and keeps its flow section unchanged, while soft pipes can deform and lose capacity – especially in deep or heavily loaded trenches.

Q2: Why is the water collection capacity higher than other drainage pipes?

Water enters through open cells covering the whole pipe wall rather than a few drilled perforations, giving 5-10 times the intake area of similar products and eliminating blocked-slot failures.

Q3: Will the open cells clog with soil particles?

A geotextile filter wrap can be supplied to screen out fines while passing water. In clean sand and gravel backfill the open structure is used unwrapped, and backfill grading rules are provided with the installation guide.

Q4: What diameters and lengths are available?

Nominal diameters from 50 mm to 300 mm as standard, with other sizes and lengths produced on request. The pipe can be cut to length on site and joined with simple couplings.

Q5: How does the flow rate compare with concrete or corrugated pipes?

Testing shows 2-3 times the flow rate of steel-reinforced concrete or corrugated pipes of the same diameter, so smaller diameters or shorter drainage runs can be used.

Q6: What is the usual B2B delivery lead time, and do you offer OEM?

Standard factory-direct orders ship from Tai’an within 7 to 14 days depending on volume. OEM/ODM is supported – custom diameters, materials, colors and filter wraps to project specification.